Palmer RIVER naab Passive 2-Channel Media DI-Box
21,600.00 ฿ 16,200.00 ฿
ดีไอ บ๊อกซ์ Palmer RIVER naab Passive 2-Channel Media DI-Box
หากเชื่อมต่อคอมพิวเตอร์เข้ากับระบบเสียง คุณภาพเสียงเป็นเรื่องที่จำเป็นอย่างมาก มีเสียงฮัมและเสียงแตก บางครั้งก็มีการสูญเสียเสียงในความถี่ต่ำและสูงด้วย Palmer naab ซึ่งเป็นกล่อง DI มีเดียสองช่องสัญญาณ ให้โซลูชันที่เชื่อถือได้สำหรับสถานการณ์นี้
หม้อแปลงแยกที่ดีที่สุดในระดับเดียวกัน และ Ground lifts แบบแข็งหรือแบบอ่อนแบบสลับได้ช่วยป้องกันเสียงฮัม หม้อแปลงยังรับประกันการปรับระดับและอิมพีแดนซ์ที่สมบูรณ์แบบ ผลลัพธ์ที่ได้คือเสียงที่สะอาดปราศจากเสียงรบกวน
หากจำเป็น Palmer naab สามารถเปลี่ยนจากสเตอริโอเป็นโมโนได้ ซึ่งมักจะมีประโยชน์มากในทางปฏิบัติ สัญญาณผลรวมโมโนจะมีให้ที่เอาต์พุต XLR ทั้งสองพร้อมกัน ด้วยวิธีนี้ naab ยังสามารถใช้เป็นกล่องแยกได้
ที่ด้านอินพุต มีการเชื่อมต่อที่หลากหลาย: ช่องเสียบแจ็ค 2 x 6.3 มม. ซึ่งสามารถเป็นแบบบาลานซ์หรือไม่บาลานซ์ได้ รวมถึง 2x RCA และมินิแจ็ค 3.5 มม. (สเตอริโอ) 1x ซึ่งช่วยลดความจำเป็นในการใช้สายอะแดปเตอร์ ซึ่งคุณมักจะลืมพกติดตัวไปด้วย! เอาต์พุตเป็นซ็อกเก็ต XLR ระดับมืออาชีพ การเดินสายแบบบาลานซ์ช่วยให้เดินสายได้ยาวขึ้นโดยไม่มีเสียงรบกวน
เนื่องจากโหมดการทำงานแบบพาสซีฟ Palmer naab จึงไม่จำเป็นต้องใช้แหล่งจ่ายไฟ ทำให้ทนทานต่อความล้มเหลวได้อย่างมาก โดยเฉพาะอย่างยิ่งเนื่องจากตัวเครื่องโลหะที่แข็งแกร่งสามารถทนทานได้มาก Palmer Naab เป็นสุดยอดของนักบรรยาย ดีเจ และซาวด์เอ็นจิเนียร์ทุกคน
คุณสมบัติ
- สำหรับการเชื่อมต่ออุปกรณ์สื่อ (เช่น แล็ปท็อป) เข้ากับระบบ PA
- กำจัดเสียง Ground loop hum และสัญญาณรบกวนได้อย่างน่าเชื่อถือ
- การแยกหม้อแปลง Galvanic
- สเตอริโอ, สลับโมโนได้
- อินพุตเป็นแจ็ค 2 x 6.3 มม. (บาลานซ์/ไม่บาลานซ์) 2 x RCA, 1 x มินิแจ็คสเตอริโอ
- เอาต์พุต XLR แบบบาลานซ์ 2 ช่อง
- การจับคู่อิมพีแดนซ์ที่เหมาะสมที่สุดเพื่อหลีกเลี่ยงการสูญเสียเสียง
- โครงสร้างแบบ Passive ไม่ต้องใช้แหล่งจ่ายไฟ
- วัสดุโครงแข็งทำจากอลูมิเนียมและเหล็ก
- ออกแบบในประเทศเยอรมนี
สเปค
- ช่อง 2
- ประเภทพาสซีฟ
- หม้อแปลงแยก
- อินพุต 2
- ประเภทอินพุต Unbalance
- ขั้วต่ออินพุต TRS 3.5 มม., แจ็ค 6.3 มม., RCA
- เอาท์พุต 2
- ประเภทเอาต์พุต Balance
- ขั้วต่อเอาต์พุต XLR
- สวิตช์ Ground lift
- คุณสมบัติเพิ่มเติม สวิตช์รวมโมโน
- ตัวบอดี้อะลูมิเนียมหล่อ
- ขนาด (สูง/กว้าง/ลึก) 140 x 50 x 58 มม
- น้ำหนัก 0,555 กก
- อุณหภูมิแวดล้อมระหว่างการทำงาน -20 – 70 °C
English Descriptions about RIVER naab Passive 2-Channel Media DI-Box Below
If you connect a laptop to a sound system, in many cases the sound quality leaves a lot to be desired. It hums and crackles, sometimes there is also a loss of sound in the low and high frequencies. The Palmer naab, a two-channel media DI box, provides a reliable solution for this situation.
Its best in class isolating transformers and the switchable hard or soft ground lifts prevent any humming. The transformers also ensure a perfect level and impedance adjustment. The result is clean sound without any noise.
If necessary, the Palmer naab can be switched from stereo to mono, which is often very useful in practice. The mono sum signal is then available at both XLR outputs at the same time; this way, the naab can also be used as a split box.
On the input side, there is a wide range of connections: 2 x 6.3 mm jack sockets, which can be balanced or unbalanced, as well as 2x RCA and 1x 3.5mm mini jack (stereo). This eliminates the need for adapter cables – which you always forget to take with you anyway! The outputs are professional XLR sockets; their balanced wiring allows even longer cable runs without any noise.
Due to its passive mode of operation, the Palmer naab does not need a power supply; this makes it extremely failure-proof, especially as the robust metal housing can withstand a lot. The Palmer naab is the ace up the sleeve for every lecture traveller, DJ and sound engineer.
Features
- For connecting media devices (e.g., a laptop) to PA systems
- Reliably eliminates ground loop hum and interfering signals
- Galvanic transformer isolation
- Stereo, mono-switchable
- Inputs as 2 x 6.3 mm jacks (balanced/unbalanced) 2 x RCA, 1 x mini jack stereo
- 2 balanced XLR outputs
- Optimal impedance matching to avoid sound losses
- Passive construction, no power supply required
- Solid casing made of aluminium and steel
- Incl. rewritable tour label for attachment onto the back of the naab
- Engineered in Germany
Product type | line isolator |
Channels | 2 |
Type | passive |
Transformer isolated | Yes |
Inputs | 2 |
input type | unbalanced |
Input connectors | 3.5 mm TRS, 6.3 mm jack, RCA |
Outputs | 2 |
Output type | balanced |
Output connectors | XLR |
Ground lift switch | Yes |
Additional Features | Mono summing switch |
Housing | Aluminium continuous casting |
Dimension (H/W/D) | 140 x 50 x 58 mm |
Weight | 0,555 kg |
Ambient temperature during operation | -20 – 70 °C |
Relative Humidity | < 80 %, not condensing |
Accessories (included) | Inscription label (tour label), rubber feet |
ประเภท | DI Boxes |
---|
สินค้าที่เกี่ยวข้อง
Radial
Pro Series Direct Boxes
J-Class Direct Boxes
J-Class Direct Boxes
J-Class Direct Boxes
Radial
Pro Series Direct Boxes
J-Class Direct Boxes
J-Class Direct Boxes
Triton Audio